whenever i try to do this i never get much back, any tips? oh and what proportion do i mix the coke with baking soda???
1 gram baking soda for 7 grams coke, for that GGGGGHETTO DOPE M M M M M MAKE CRACK LIKE THIS M M M M M MAKE CRACK LIKE THIS (GHETTO DOPE!)
oh pulling out some master P . how UNTHOUGHTFUL OF you just kidding. yea what he said , or thats what the song says at least
mix about 1 g of coke in 10 ml of water in a small vial. Slowly add drops of ammonia to the solution. A white milky precipitate will form. Stop adding ammonia when additional drops no longer result in precipitation. Add 5 ml of ethyl ether, close vial, and shake. The precipitate (freebase) will dissolve in the ether. Siphon off the ether with a pipette (ether and water don't mix), and slowly drip it on a plate. As the ether evaporates, white crystals will form. This is the evil freebase. Crush the crystals and put under a heat lamp for at least 24 hrs to let the solvent evaporate. ETHYL ETHER IS EXTREMELY FLAMMABLE. IN THE PRESENCE OF AIR IT CAN FORM PEROXIDES WHICH WILL SPONTANEOUSLY EXPLODE! ALSO, ETHER CAN "CRAWL" FROM AN OPEN BOTTLE AND TRIGGER AN EXPLOSION MANY FEET AWAY. or mix 2 parts ok coke HCL for 1 part baking soda in 20 ml of water. Heat solution gently until white precipitates form, and stop heating when precipitation stops. Filter and keep precipitate. wash precipitate once with water (this procedure usually omitted in street product). Dry 24 hours under heat lamp. Voila. The product is much less pure (there is lots of baking soda left) but the procedure is safer. its not like i ever made crack though (wink wink)
how do you filter the solution if using the baking soda method? Or how do you do it 1 hit at a time? I know people will cook a small amount with soda and water on a spoon to get rocks. How the hell do you do this. I never understood the filtering process. And how do you know when to stop cooking? I cant tell when "the white precipitate stops" cause the whole thing is white and looks the same pretty much after you first mix everything together.
when u cook it with the baking soda method if your only making a little you can use a spoon, put 2 times as much coke as baking soda on spoon add a little water(it helps bind the baking soda and coke)then torch the bottom of the spoon stop cooking it once it forms a close to solid mass (itll be a little gluey but will eventually form a solid, you can smoke the gluey mass but its best and easiest to light when it forms a solid). you can tell when the the white precipitate stops by simply noticing that its no longer boiling and its forming a solid, practice makes perfect. also this is the easiest method to make crack but it doesnt make the purest stuff, but i wouldnt do the ethyl and amonia method unless your experienced, heck i wont even use that way.
