I have none of the required materials, NONE. About how much would it cost for the extraction of MHRB stb? And do they sell naptha in smaller quantities, same with lye. I'd also like to buy the lye through a store instead of online, where can I find it? Also, about how many trips does an average extraction (100mg mhrb) yield?
The initial investment is steep - $200 to $300, but once you are up and running you will be able to produce it for $20 to $30 a gram, not counting your time (formidable). i have not yet found a source where i can walk in, pay cash and buy food grade lye. Therefore, i order small and use different vendors. Naptha is sold in gallons and quarts at Ace Hardware and other stores. Art stores might carry it in smaller volumes, but it will be pricey that way . . . Hope this helps.
many places sell 99%+ lye in the plumbing section. not sure what makes it food grade but unless you pulling up the basified water/mhrb with the naptha I wouldn't worry about smoking lye
food grade dont have surfactants in it.. http://vimeo.com/10662567 familiarize yourself with the soap making terms, when buying Lye , LIE about what you use it for.. like making soap..
^^^^ This. i even keep homemade, decorative soaps around the house and give them as holiday gifts to the straight/neighbors - claiming homemade.
100 mg?? What... The natural source I use for extraction purposes typically about 11kg in bark form, comes out to about 9-16 grams depending on many factors. Naptha they sell in a one quart can next to the denatured alcohol at any hardware, and forget the lye use the liquid(plumbing sections). If you got a big hoody all free at HD & Lowes
Both of these things confuse me. I think CFoust91 must have been asking how much DMT you could expect to yield if you extract from 100 GRAMS of MHRB . . .The answer is 750 mgs to 3 grams . . . realistically 1-2 grams. Philbilly Magic - I really, really hope you meant 1.1 Kilograms and NOT 11 Kilograms of bark to get 9-16 grams of DMT. Using the straight to base tek I have posted in this forum, one can expect to get the yield you mentioned from a single kilo of MHRB. CAUTION - If you use the plumbing section, always make sure it is 100% lye. Nothing else will do. I recommend dual-cartridge respirators for all extractions involving solvents.
My bad yes I did hit the 1 one to many times. & disregard the lye thing I got lost in my thought processes of people using lye, totally unneeded for M-amp cooking, I just got into the deamster about two months ago & Its crazy how many chemicals overlap in all of these creations
