Important info for oxycontin or any pill that gells when water is added

I have been reading for awhile about generic oxycontins and some other opiates that will gel when crushed and water is added. I am also certain that the new Oxys can be extracted using this method as well.

I am certain of this method because I have a biochemistry background and I have used the method NUMEROUS times with no problems.

The ingredient in pills that gel is hypromellose. If you do some research on hypromellose you will see that is is NOT soluble in dehydrated alcohol. Dehydrated alcohol is just 100% alcohol, not 99.999999% but only 100% can be used. You can use ethanol, but it is hard to get and expensive. The better choice and what I use because I also drag race, is methanol. Be careful using methanol because it is hygroscopic, which means it absorbs water if left in the open and that will make it unpure (not 100

Simple method of extraction. Oxymorphone and most other opiates are slightly soluble in alcohol, something in the order of 10g per 500ml of alcohol, so you will have to use quite a bit but nothing that can't be handled. The more the better, it will just take longer to evaporate, but believe me it doesn't take that long.

Crush the pills and dissolve them in the alcohol. When you do this the hypromellose will not be activated because it isn't soluble in alcohol and therefore it will not gel. If there is any water in the alcohol, you will be screwed because not only does it gel up, but the opiate ingredient in the first thing to also be absorbed since it is soluble in water.

Now that you have dissolved the opiate into the alcohol, all you have to do is evaporate the alcohol. Don't worry, pure alcohol leaves no residue after evaporated. BE VERY CAREFUL AS THE ALCOHOL FUMES WILL BE HIGHLY EXPLOSIVE. So do this in a ventilated area. I use a Pyrex pie dish and heat it with a conductive heat that doesn't produce a flame and then vent the fumes out the window. In about 15-20 minutes you will have 100% oxycodone/opiate in the pie plate ready to use as you wish.

Be careful when you first do this because the powder in the pie plate is MUCH stronger then it is when you crush it because all of the other nasty ingredients are gone. I suggest doing it with one or two pills so you know what you can take.

Hypromellose is in most every pill that gels, Opana ER, Mscontin, generic Oxycontin and the new version of Oxycontin thats coming out.

Don't bother crushing any pill with hypromellose in it and expect it to be immediate release, because it does not release the ingredient any faster as it is absorbed by the polymer structure once it is hydrated. This is the reason they use it to prevent abuse.

All attempts to prevent abuse CAN ALWAYS be overcome. Companies like Purdue only do this so that they can "reformulate" a drug whose patent is expiring and reformulating it makes the patent start new again since the formulation is now different.

Hope it helps!

 

Okay, so once the alcohol evaporates and you have the pure powder, can u just dissolve it in cold water and IV it? Do I still suck it up into the needle through a cotton ball? Or, do I still cook it before I bang it? Please clarify, thanks.

 

i read that ketchup will break it down.. than just slam it on a hotdog and ur on the way!!!

 

ha ha ha! that's hilarious...I like people who like to get high with a dose of humor mixed in...

 

i actually nodded out for a while at my desk....opiates and lack of sleep........mainly from lack of sleep and i had a dream that i was breaking them down with ketchup and i was the only one who knew, lol