very possible to put doi on blotter.. i put all kinds of rc's on blotter!! make the solution dense at 20 mgs per ml and drop it on with isopropyl evenly because it drys quickly then once it drys you will see it bleeding through the blotter and if its not even drop more in the areas that havent blead the chemical through then once it is 100% dry just bang it on a piece of glass and scrape up the extras. when you drop the chemical on it do it with a dropper or syringe and do it on glass so you can scrape up the leftovers. you can use standard quarter inch blotter for dox chems or 3/4 inch blotter for 2cx
Actually it is very accurate. You want each drop to be 1-2 mgs and a single drop actually fits on more than 1-2 hits so at about 15-20 drops per ml you want atleast 20mgs/ml to make sure each hit has 1-2 mgs relatively. I have done this many of times. The only way you dont see the powder bleed across the top like a glazed doughnut is you use ultra thick watercolor paper which i have seen with the tiedye jerry garcia prints before as there was very little powder that bled through to the top after it dried. And one thing to remember is to drop on the back of the print so that it does not cover the top with this layer so that you can see the print on the other side if you use standard size watercolor paper. Trust me i know and here is some 2ce i layed on blotter actually. And you can see it covers the top to where you cant see the image. I did that at a concentration of 40 mgs per ml to get it at 5 mgs per hit Notice the big blotch of white on the bottom right piece that is thicker than the rest. That part was laid un-even. the one on the top looks just about right with a pretty even coat. Reminds me of powder dougnuts but before it dries it actually looks like a glaze on a doughnut. Matter of fact i might lay blotter with some 5 meo dalt today if you want me to come back and show you how it went. I will test solubility first because i have never used that chem and im in trial stages with that
Im going to be honest..... Id rather just disolve it and drip each blotter individually hah. How strong would a blotter be with LSD and DOx? I am asking hypothetically.
stop disagreeing with me then but really, i'm just saying that your method is not as accurate as just weighing out a single dose with an accurate scale. you are introducing all kinds of inaccuracies doing it that way. maybe not enough to make a noticeable difference, but still...
There's a river pouring From a pure and a crystal stream And it carries my heart along Carries me all my life And I know it will bring me home There's a choir singing With a force that can light the sky I will join with a voice deep inside Anthems for joys gone by And for joys I am sure will come Golden treasure in the evening sky It's good to be alive Golden measure, hear the music cry When my heart sings Of golden things There's a dove ascending Like my thoughts in the summer sky And she carries my soul along Clear to eternity And I know I am not alone https://www.youtube.com/watch?v=3o_q49o04wk"]YouTube - There's a river　～ｓｔｅｖｅ　ｗｉｎｗï½ï½ï½„
