the best homemade piece contest

This pipe was made for me by my hubby.

 

No that's just some pic I found offline. My stuff isn't that great but it still is a lot better than that.

 

Yo, the best way I discovered to make a QUICK HOMEADE smoking device is:
1. Get a RUBBER INSULATOR off any distributor cap or spark plug ( the rubber that is around ANY spark plug or distributor cap on a car.)
2. Find a Socket from ANY ratchet set (making sure it fits into the RUBBER ISULATOR)
3. Get the wire mesh SCREEN out of MOSTLY ANY faucet in ur house. ( this can be done by turning the protuberent little lip that chills OUTside the faucet COUNTERCLOCKWISE)
4.PUTTING IT ALL TOGETHER: First, take the SCREEN and put it into the bowl of the ratchet set.
next: take the BOWL of the RATCHET and push it into the top of ur RUBBER INSOLATOR making sue it fits snugly.

thats pretty much it but you can add a MOUTHPIECE by putting one of those Ratchet ATTACHMENTs that has a smaller base than it does a mouth and sliding it in the end. Aight??

Check out MySpace.com/CrackerTrash for any further devolopments

 

i dont think anyone mentioned it yet but honesly what i get a really good hit out when i got to make something fast is a simply green bottle of orange juice...plus it conserves lots of smoke

 

I took an old xbox contorller nd opened it and took all the stuff out and put it toghter so its hollow and at one handle put a trumpet peice in a drilled hole. Then i put tin foil over the trumpet peice and stabbed holes with a toothpick. Then i drilled a hole at the other handle for the mouthpeice.It was pretty narley

 

Gravity Bong if it's done correctly.

2 liter*
Usually a good one hitter quitter for people with low tolerances.

 

Whenever I want to make something really fast I found the fastest ways are:

1.) Get a water bottle and burn one small hole (easiest with cigarette but can be done with lighter alone) near the top about 1/4 of the way down from the cap. Burn another one about 1/4 of the way from the bottom. Make a foil bowl at the top where the cap would have gone then you just light the bowl, inhale through the bottom hole and use the top hole as a carb. Its fun to watch the bottle fill with smoke and we like to make it a game where like the first person who doesn't "whitewall" it (fill it with enough smoke to eliminate any transparency) misses his next hit in the rotation.

2.) This is probally the fastest and easiest. Get a screen out of one of the faucets in your house. Unscrew a door stop from your wall then bend the door stop and fit the screen through the side of the door stop... wallah!
Though this pipe is quick and simple, the quality is poor.

 

i think my fav would have to ne the water gravity bong
its a GB that pulls through the water (duh)
-i just take a gallon juice container
-cut out the bottom
-cut a small hole in the lid
-insert long tube that goes about 3/4 down the container
-connect that to a nice steel bowl
-fill a 5 gallon bucket with water and boom -
--water gravity bong -or as joe says "bong gravity bong"
and if your thinkin of tryin this the key is a large chamber so enough pressure can start to pull through the water (becauze the tube is deep in the begining)
and try to get it cherried quick so you can blow into the bowl and fill the whole chamber

 

a well made billy does the trick, most people in aus use a hose for the stem piece, powerade or gatorade bottles work best as they dont crumple

 

THe best homemade smoking thing i have ever made was Skeletor. A badass halloween skull i made into a bong. Has a glass slidepiece, holds ice in the top tube and even has a hole in the mouth so you can breathe the hit out of the skull's mouth. a pretty good smoke, and it has a carb on it in case you don't feel like getting crushed with a huge hit... Just took a break and hit a big one with some homegrwon... least to say i'm FUCKED UP!!!!... if u want to see pics, email me at wemark2@gmail.com

 

carve out an apple but do it quick...b/c it will start to rot quickly...plus you get a nice apple taste to the bud...and an awesome high

 

i made a vaporizor out of a light bulb, a pen, a water bottle and some tape. its the shit! i got the directions on the internet and its ez as hell to make.

 

Me and a few friends made something we like to call a blizter hookah. Its basically a blitzer bucket made with a milk carton, with two caps, one for a bowl and one for three pieces of surgical tubing, as to have as many nice, controlled, COUGH FREE rips as you want. I'll post a picture next time visit it.

 

a can

 

I made a very elaborate bong system thing out of lots of extra pvc pipes and a couple empty extra size peanut butter jars. It percolated three times and sat on the floor but the bowl and mouthpiece rose up about 5 feet so you could hit it while standing. It ended up just being to big and broke. =/

 

damn. that POM bottle is such pwnage...
where did you get the glass slider/stem for it?

 

MY NEW HOOKA

 

what about pen pipe

 

These are just a few of the pipes Ive carved, their made from corn fed whitetail antler (Iowa Ivory) the snake isnt done yet, thats justa face veiw. they last forever as they dont break when dropped ect.. and anyone who owns a Crowind pipe has the only one like it on the whole damn planet!! one of a kind thing. the only problem with my pipes is they seem to turn even your best of friends into theives!lol. later man Crowind.

 

I once my a bad ass bubbler out of a dimetap bottle, some test tubes my chemistry teachers gave me, and a shit load of duct tape. I loved that thing but one day it just disappeared. I am pretty sure my mom found it and took it.