my dad found my pipe, substitute suggestions?

im tired of using uncreative methods like cans and tin foil and plastic bottles. anyone know of an interesting method of constructing a pipe, or preferably a bubbler?

 

You could probably make a wood pipe if you have sometime.

 

true, i've never tried, but i've made wooden spoons and have used enough wooden pipes to know how to make them.

i would have to be camping though, because otherwise it would be suspicious with the method i would use.

the past months i've just been rolling joints and blunts and tend to prefer them over pipes because i was going through lighters too fast.

 

i made a little wooden pipe before out of walnut and i took a knife to it and carved it, it would get three hits out of it and I would keep it in my jacket and at work when i went out for cig breaks and to take out the trash I would take some hits, and when a sketchy situation happened i just threw it as far as i can in some tall grass and there was no worries about it.

 

an apple?

 

I currently don't have a pipe so I've been using an altoids can. I used a hand drill to putt four small holes in the top right corner of the can, then used a blunt edge to shape the bowl. After that you just make the carb on the left side and the mouth peice on the end. Works great. If you like being entertained when you smoke, you can also make a gravy bong pretty easily. I just putt a hole in the top of the bottle lid (A normal plastic coke bottle in this case) one in the bottemof the bottle, then made the bowl out of tin foil. Works great, but it's a bit hard to keep the water from spilling if you're baked.

 

^^^You can also use a bowl from your bong as well.

 

If you're in my situation you must be extra creative though ^-^

If been making alot of stuff lately just to see what works and whats possible. Personally, I have alot of fun making basic wooden pieces

 

dude i would say either make a lightbulb vape.. those are fun to make and use. or make a sweet ass huge bong. One time i was bored so i took a bunch of empty gatorade bottles and cut the tops off. i would then tape them together so one bottle had two ends with caps on them.. i made about 3 of those. then i would take the caps and but holes in them and tape to together so u could screw the bottles together. then i made the base outta a liter grape juice bottle. when i put it all together it woudl about 3 feet tall i kno thats kinda hard to understand sry but if u get it, try it its tight