Hello, I just quidded some salvia and then smoked a joint of it. I know I should'nt and all but I did. Anyways, after quidding, I think I reached level "1" or "S" on Daniel Siebert's scale. I almost felt as if something was happening, but no visuals or anything. I sorta felt lighter and a little dizzy. When I walked into my kitchen, it sorta looked like my hallway was wider than usual. I just tried some regular leaf. Man that quid tasted nasty. Anyways, I still have 10x 2 grams, and 2 grams of 6x, plus like 4 ounces of regular leaf. Does anybody know how to make extracts? I'd like to compact my leaves a little smaller. Thanks.
http://www.entheogen.com/forum/attachment.php?attachmentid=287&d=1155641975 this is a method I know. I get it all out and put it on paper for better dose control. or I roll plain leaf in a joint, as I like that too. quids, nahhh fuggeddaboutit
Extracts arent that hard to make. You just need a solvent, such as 99% isopropyl alcohol or acetone. http://www.erowid.org/plants/salvia/salvia_extraction1.shtml That link should tell you how to do it. If you don't understand a lot of the stuff it basically tells you to: Take your leaves, put them on a piece of cloth over top of a bowl of DISTILLED water, lower the cloth down so the leaves are covered in water for 7-10 mins, then take the cloth and gently squeeze the water out. Powder your leaves, and remove a 10th of the amount. Put the other 9/10 of ground up leaf in a glass jar with some isopropyl or acetone, (beware acetone eats plastics, do not let this occur as it will taint the final product) Shake the jar vigouresly for about 2 mins, then let the jar sit for an hour or 2. If you are using acetone take out all the acetone and let the stuff on the bottom stay. Take all the acetone and put it in a glass pan. Let it all evaporate, then mix in some isopropyl alcohol and the 1/10 leaf powder you took out before, and let that evaporate also. Theres a way to do a wash with the isopropyl to get a stronger extract but I never really figured out what the fuck they were talking about. If you just use isopropyl put the 9/10ths of powder in a jar with isopropyl shake it for 2 mins and dump it in a pan and let it evaporate, then add in the leaf powder with a bit more isopropyl and stir it all up. This method should give you about 5-10x extract. **WARNING** DO THIS IN A VENTILATED AREA The fumes from this stuff is extremely flammable, little to no heat should be used.
