solar

Discussion in 'Hippies' started by gate68, Apr 14, 2006.

  1. gate68

    gate68 Senior Member

    Messages:
    2,392
    Likes Received:
    5
    This thing is H. O. T., hot!
    One of the main uses of energy in the American home is to heat up water. It takes a lot of electricity to heat up water, this cost a lot of money. All day while you are at work, or at school, the sun is busy heating up things outside. If you are a little kid and you get to play outside all day then you know all about this. Lucky for us the sun is free, all we need to do is figure out a way to use that energy to heat water. That's why we are going to build a solar thermal panel, these guys are great at heating up water.



    Materials needed:
    Water


    Drill (with both drill bits and screw bits)

    Some scissors

    A saw (a simple hand saw will do)


    1, 2X2' 1/4 inch thick plywood

    2, 2X1' Plexiglas sheets.

    9, 20" 2X1" base board planks

    1, 5 gallon bucket

    1, 4' length of standard 3/4" heater hose

    1, 3' length of standard 3/4" heater hose

    4, marine grade stainless steal clamps

    4, 3/4" thru-hull PVC thingers (sorry I have no idea what these things are called other than thru-hull)

    2, 2X2' black pond liner material (you can buy this in big roles or buy patch kits)

    a box of wood screws

    wax paper

    Silicon Caulk or that silicon goop stuff (like glue).

    pond liner adhesive tape (this and the liner you can get at a water garden store)


    Time:
    I am not going to lie, this project will take you a good 3-5 hours of work, and cost a fair about of money (50 bucks or so), but it works really well and once you get everything cut and assembled it only takes about 1 hour to set it all up.

    Pictures!
    Check out the rest of the pics here



    Are you a Do It Yourselfer?


    Send in your Projects to TheSietch@TheSietch.org


    [​IMG][​IMG]

    Hot Water From The Sun:

    The first thing we should do is cut our backing and our pond liner, when you are done you should have a 2 foot by 2 foot square of wood (1/4 inch thick) and two 2X2 foot pond liner squares, drill two 3/4" holes in the wood as shown. Cut the outside slats as well.


    [​IMG] [​IMG]
     
  2. fylthevoyd

    fylthevoyd Super Moderator Lifetime Supporter

    Messages:
    2,018
    Likes Received:
    21
    gate

    these home made solar panels are a major fuel saver..regardless of how a person heats their water....and on a greater scale they can also be incorperated

    into space heating as well.As far as a non-energy "passive" system goes...these panels offer a wealth of savings to the do-it-yourselfers.
    Thanx for posting this...hopefully people will take heed to the heads up


    Once the government figures out how to tax the sunshine....then solar power will be the norm...until then...it is our responsibility to harness this power.
     
  3. cerridwen

    cerridwen in stitches

    Messages:
    18,126
    Likes Received:
    13
    We hooked up a few solar panels to our house last summer, even though we're not totally functioning on solar, we did save quite a few $$$ on heat and such.
     
  4. purplesage

    purplesage Ah, fuck it...

    Messages:
    1,016
    Likes Received:
    0
    You can make some solar cookers out of cardboard and aluminium foil - don't know how well they work though.

    We are approaching winter here - will a solar panel work ok then too, or is it preferably for use in summer?
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice