can someone tell me how to make a bong out of like, stuff I can find just around the house? or do you know of any websites that show you so I can get pics?
you will need the body of a disposable pen, a quarter inch drive socket with a smaller size - I forget which size fits into the pen body, maybe a 5/32 size, and a plastic bottle of a suitable size that you can easily make a hole into the side of it. the socket is the bowl and it must fit tightly into the pen body (tube). the quarter inch drive side is the bowl. then you make a hole in the side of the bottle that is a little smaller than the pen tube, which is now the stem of your bong. keep it as small as it can be and still allow the tube into it. you want it water - tight. make sure you keep the angle of the stem in mind when placing the hole in the side of the bottle. if you have any questions, pm me. happy toking.
it's really simple, man. take a plastic water bottle, burn a whole to stick your bill through, burn a trigger and fill it up with the appropriate amount of water. be sure to cram your bill through before the plastic hardens and you cant force it through.
here's a good one supplies needed: 2 or 3 liter bottle foil a knife or scissors bathtub, sink, or container to put water in that the 2 liter bottle will fit in 1. take the 2 liter bottle and cut the bottom part of the bottle off 2. poke some holes in a piece of foil 3. put bottle in container w/ water making sure the water is deep enough to reach about 3" from the top 4. put whatever your smoking in the foil and place on top of the bottle 5. lift up the bottle and hold the flame right above the herbs while lifting(make sure not to lift above the water line or you will lose all the smoke) 6. take foil off, push bottle down(be careful, if you do it too fast you could end up w/ a mouthful of water and there you have a nice gravity bong
