Okay, so I'm pretty positive its easy to find some perforated blotter somewhere. But my main question is, what would be the best method on getting the lsd on there? I'm thinking, I buy a vial, pour it into this square container and place each sheet in there. Use a pair of tweezers to dunk them so they are fully covered, let it sit for a little bit, then use the tweezers and hang it up to dry. But idk how long drying takes, the conditions it needs to be in, etc. Anyone got any advice they could give me?
im pretty sure the most common meathod is too use an eye dropper and put a few dros on the blotter the wrap them in tin foil. the thing i see wrong with your meathod is that (1) i dont think acid "dries" i think its just absorbed into the blotter (2) you would inevitably have to use a heat source (which would break down the acid) or a fan (which would spray it across the room)
How do cubes absorb it better? And why would my method waste my acid? I know acid does dry, eventually. We've done it with altoids all the time. But I figured, we make blotter hits. And instead of the weak ass shit going around, we would have very strong hits. Like how they should be. I'm figuring a vial could easily make maybe 4 sheets if done right. That way, its all evenly cut hits, and they are top potency. As for drying them, best thing I can think of is a cool dark place with an ac running.
Well of course. Lol. That's like, an absolute must! Lol. But, if I leave a drip pan under, the ac is absorbing moisture to help it dry. Wouldn't the liquid start to disappear that's in the pan? I'm thinking if that happened, id be left with some lsd crystals possibly?
Hahaha! How strong is one drop of your liquid? Do you think that putting it on blotter paper will increase the strength four fold? Why if you have liquid do you want to fuck around with blotter paper for, especially if it's for personal use. Blotter is made by laying the sheets in a glass pan which contains some type of solvent; ethanol, or de-ionized, distilled water being the two most popular and easiest to use, in which a GRAM of crystal has been dissolved. A gram is enough for 10,000 doses of 100ugs each assuming that the crystal was 100% pure. More likely the crystal is in the 80%-90% pure range yeilding doses of 80-90ugs per. Most full sheets are 900 or 1000 doses. So one gram of crystal will produce approx 10-11 full sheets. Adjusting for a desired potency is simply a matter of increasing or decreasing the amount of crystal used in the solution. What is so hard about just dropping it right on your tongue? the more you handle it, the more it degrades.
That sound exactly like what I've heard, except that I thought the terminology was a "sheet" is 100 does (usually 10x10). Maybe you refer to a big piece of blotter but not a "sheet" as a unit of doses. (also, if the big piece was 900, it'd be hard to cut it into square 100 dose "sheets.") (I remember hearing something about a book or a bible being 10 sheets (or maybe 100), but that's out of my league.)
Most of the blotter sheets used for large scale are 900 or 1000 dosage units; ie: "little squares" When you hear of a bible it is referring to 10 1000 hit sheets or 10,000 hits. When you see a 100 hit "sheet" it is often not the entire artwork or the artwork is tiled on the larger sheet. Most sheets are already perforated so no need to worry about cutting. check this site;http://blotterart.com/index.aspx It will answer a lot of your questions just by checking some of the pics. You will notice that most are many more than 100 doses.
This is why I love this community. You guys are always so helpful, and my questions always end up answered. =) Ill tell you what, the mad hatter and the jerry garcia ones interest me. =)