How Do I make my own Pipe??

I need help building a pipe, I'm a novice pot smoker and I have no clue how to build it. I'd appreciate step by step in detail exactly how to do it if anyone would be so kind.

Thanks a lot.

 

ok ill tell u what, next time i visit my dad, im gonna post all my home made pieces.. and i have alot.. i got water bongs, and spoons and shit.. and they look pretty good.. like i dont use plastic or nothing, i drill glass and stuff like that, like bongs i made from a vace or a beaker.. just check the shit out, im seeing my dad tommarow night i think.

 

The best way to bulid your own pipe is to get a coke bottle(20oz or 2 liter), and poke two holes in it, one hole is the carb and one hole is the suck hole. The carb hole needs to be small enough to cover with you thumb and the suck hole needs to be a little larger but still rather small. Then you put some foil in the top of the bottle in the form of a bowl. Poke three small holes in the foil bowl and make sure it's air tight around the edges. Now you have a homemade bong. Just pack some weed in the foil bowl and put your mouth on the suck hole with your thumb covering the carb hole. Light it and hit it, then remove your thumb and take the smoke to your lungs.

 

ok lets keep it coming folks haha...im looking more into building something i can use over and over again not so much something u make for a day.

 

No! I made one out of the bottle + foil...it works, but...

The foil gives you metal poisoning! I've heard this from numerous potheads!

Just get someone 18+ to go into a head shop and buy you a chillum or something. Most stoners are very friendly, they'll do it for you.

I made one out of wood...just found a piece of wood in a school shaped like a pipe and drilled a hole through it. Got me fucking high...mighta been the weed...but the pipe certainly worked. Oh, and I taped a Lego onto the end to make a mouthpiece type thing.

w00t

 

If you want a fairly permanent pipe that doesnt look like trash, get some bamboo and sealant. Use logic to figure it out.

 

mighta been the weed?

 

Id say if u want a permenant one thats homemade and looks good use wood its easyto make or if u got a glass drill bit just make a bong but go to everyonedoesit.com thats were i learned

 

im going to post this here as I always do because i dont like seeing people make pieces that are unneccesarily less efficient and well made as they should be.

this is the sort of bong that I keep for months, until someone else throws it away. it is not the sort of thing you throw out, but cleaning it is definately an option (not on i tend to take).


get:

1. bottle (with a wide nozzle/mouth hole such as gatorade/powerade)
2. a length of sturdy dark green garden hose about 4 or5 inches long
3. some aluminium foil (or, a bowl from a headshop, which is what i use simply because it costs me 3 dollars and is down the road, but i use foil without thinkning twice if i dont have a bowl, i will explain later)

melt a hole about 3 inches from the bottom which is just a bit smaller than the diametre of the hose (but not equal, and not under any circumstance bigger).
when that hole is still hot, push, aggressivly, the hose into the hole. if the hole is the right sizr, the hose should be a little hard to fit in at first but then push through fairly easily (but if you dont have any effort putting the hose in, ouve made the hole too big and it wont be airtight)>

then melt another hole that is about an inch or two above the other, on the opposite side of the bottle. make it so that its about one centimetre in diametre; you have to be able to cover it compltely with your thumb.


then get alimunium foil and layer it so theres about 2-4 layers of actual foil. wrap this around the end of your pinky finger, and push it on tight. or you can use anything thats slim, and phallic, but round at the end.

push this aliminium tipped phallice into the hose, however big you want the bowl to be.

poke a small hole no bigger than a couple of millimetres wide at the bottom. wrap around the aliminium to make it stay on teh hose, and cut off excess foil.

there you have it, the basics for the best piece for smoking weed with. the standard australian style ghetto bong, model 'bill'

people will say not to use aluminium but when you use it long enough (not too long required), it builds up a layer of resin which will prevent the metal being touched by the flame.

 

Get a glass water dropper (like the ones in your science class or the ones that are connected to the lid of an iodine bottle) and take off the rubber part. Thats it, all you have to do is pack it full of weed. I used one recently and it worked great, it can hot though but that can be fixed by wrapping something around it, my friend and I were toking in a feild of goldenrod flowers so we used a leaf.

 

I meant that it might have been the quality of the weed as opposed to the quality of the pipe.


DON'T USE ALUMINUM FOIL! THAT IS UBER SKETCH!

The idea about the eye dropper is fucking jenius, though.

 

Get some self hardening clay (not the bake-in-your-oven kind, though) and experiment around. I've made several this way and they work quite well. Making the tube for the stem can be kinda hard, but I use airline tubing (get it at an aquarium shop) covered in veggie oil or something like it (i heard even liquid soap works). That way, not only can you make the tube easily, but you can also have a bent stem (like a sherlock holmes style pipe) that you can't do if you use a rigid object instead, like a pen or small dowel

 

MJphysicist, in your new picture you no longer look like Gordo from Lizzy McGuire, whats the deal?

 

Get a cat... kill it... shove some weed up its ass... put ure mouth up to its mouth, spark it, and breath in just like a normal pipe... and yes, you are indeed smoking weed out of a cat's ass...

... i know... i know..

edit: or if you want... you can just do it while its alive ;-D

 

i always use an empty pop can when i'm in need.

 

ok apple,tin foil,and a pen no lie figure it out

 

Sweet bejesus. That's...not right.

(could you use a fetus?)

I yanked an eye dropper from Chem Lab. I can't wait to see how it works. This weeked, hopefully...