ignignokt
11-14-2004, 11:45 AM
i stumbled across this while surfing the web. i already see some errors in it (the guy who made it claims to be a professional chemist). what do you guys think?
VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV VVVVVVVV
Lysergic Acid Amide Extraction
--------------------------------------------------------------------------------
A Method for the Extraction and Usage of LSA from Hawaiian Baby Woodrose Seeds or Morning Glory Seeds (15 medium doses)
by Dave Mennenoh
HBWR: To dose, you don't have to remove all the shell, but just take a pocket knife and scrape all the "dark-brown" stuff off until the seed is completely a "creme" color.
--------------------------------------------------------------------------------
Items you will need:
128 HBWR seeds (No hulls); seeds only. Or 3,500 MG seeds.
A 50ml liquor bottle. These are the small 'airplane'-sized ones. It should state 50ml on it.
A quantity of non-polar solvent. Coleman's White gas is perfect.
190 proof Everclear, or Vodka. Ethanol. (Bacardi 151)
A small funnel comes in handy.
A couple small jars with good lids.
Some coffee filters.
--------------------------------------------------------------------------------
Extraction Instructions:
Grind the seeds to a powder in a coffee grinder. Place the powder into a small jar and pour in enough of the White gas to fully cover the seeds. You can't really use too much, but leave enough room so it shakes well. Screw on the lid and shake well for a few minutes. Let it sit for an hour or so, shaking every so often. Shaking is good.
Pour the seed / solvent solution through a coffee filter and let it drain. Putting the coffee filter into a funnel first works well. The solvent is no longer needed but can be re-used, so save it. Spread out the seed mush on the coffee filter which it is in, on a plate or something, and let the seeds fully dry out. You should smell no solvent when it's fully evaporated. It may take a couple of hours. Don't breathe the solvent fumes, if you can help it.
Once the seeds are fully dried place the powder into a clean small jar, with a good tight fitting lid. Fill the 50ml liquor bottle with your Ethanol (this is to measure it) and then dump that amount into the small jar with the seed powder. Shake well. This should sit for 3 days and shake it whenever you think of it.
Okay 3 days have passed, it's almost time. Again, stick a coffee filter in a funnel and then pour the Ethanol / Seed solution into the filter. Let it drain thoroughly. Once it's close you can squeeze out excess alcohol, but be careful not to break the filter. You can now discard the seeds, as the good stuff is in the alcohol solution that's left.
Now pour the solution into the 50ml liquor bottle and let it sit for a couple of hours. Any seed powder remaining in the solution will settle to the bottom. Once it has, pour off the alcohol, rinse the seed crap out of the bottle, and pour the alcohol solution back in. Add enough of the clean alcohol to fill the bottle and you're done.
You now have 50ml of drinkable alcohol containing the extract from 150 HBWR seeds, which should be a yellowish, clear liquid, that looks much like tequila.
Normal dosage of HBWR is 5-12 seeds, MG about 200-400 seeds and it's easy to measure. You can either get an oral syringe at any drug store that has a 1-5ml gradated gauge on the side, or use measuring spoons. 1tsp=5ml of liquid. 1ml of the 'tincture' = 3 seeds. I've found that 3ml of the liquid works very well. Mix with water, or anything else.
This method works very well, is easy to dose, easy to prepare, and you should not experience any nausea. Also, because the LSA's are extracted they take way less longer to start working. Expect to feel the effects within an hour.
Keep your little bottle in the fridge. Heat is bad for all tryptamines.
Something to note: You can evaporate off the alcohol and you will be left with the alkaloids which you can put into gel caps etc. But, this is harder to dose, etc. I've found the alcohol method very easy and precise.
VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV VVVVVVVV
Lysergic Acid Amide Extraction
--------------------------------------------------------------------------------
A Method for the Extraction and Usage of LSA from Hawaiian Baby Woodrose Seeds or Morning Glory Seeds (15 medium doses)
by Dave Mennenoh
HBWR: To dose, you don't have to remove all the shell, but just take a pocket knife and scrape all the "dark-brown" stuff off until the seed is completely a "creme" color.
--------------------------------------------------------------------------------
Items you will need:
128 HBWR seeds (No hulls); seeds only. Or 3,500 MG seeds.
A 50ml liquor bottle. These are the small 'airplane'-sized ones. It should state 50ml on it.
A quantity of non-polar solvent. Coleman's White gas is perfect.
190 proof Everclear, or Vodka. Ethanol. (Bacardi 151)
A small funnel comes in handy.
A couple small jars with good lids.
Some coffee filters.
--------------------------------------------------------------------------------
Extraction Instructions:
Grind the seeds to a powder in a coffee grinder. Place the powder into a small jar and pour in enough of the White gas to fully cover the seeds. You can't really use too much, but leave enough room so it shakes well. Screw on the lid and shake well for a few minutes. Let it sit for an hour or so, shaking every so often. Shaking is good.
Pour the seed / solvent solution through a coffee filter and let it drain. Putting the coffee filter into a funnel first works well. The solvent is no longer needed but can be re-used, so save it. Spread out the seed mush on the coffee filter which it is in, on a plate or something, and let the seeds fully dry out. You should smell no solvent when it's fully evaporated. It may take a couple of hours. Don't breathe the solvent fumes, if you can help it.
Once the seeds are fully dried place the powder into a clean small jar, with a good tight fitting lid. Fill the 50ml liquor bottle with your Ethanol (this is to measure it) and then dump that amount into the small jar with the seed powder. Shake well. This should sit for 3 days and shake it whenever you think of it.
Okay 3 days have passed, it's almost time. Again, stick a coffee filter in a funnel and then pour the Ethanol / Seed solution into the filter. Let it drain thoroughly. Once it's close you can squeeze out excess alcohol, but be careful not to break the filter. You can now discard the seeds, as the good stuff is in the alcohol solution that's left.
Now pour the solution into the 50ml liquor bottle and let it sit for a couple of hours. Any seed powder remaining in the solution will settle to the bottom. Once it has, pour off the alcohol, rinse the seed crap out of the bottle, and pour the alcohol solution back in. Add enough of the clean alcohol to fill the bottle and you're done.
You now have 50ml of drinkable alcohol containing the extract from 150 HBWR seeds, which should be a yellowish, clear liquid, that looks much like tequila.
Normal dosage of HBWR is 5-12 seeds, MG about 200-400 seeds and it's easy to measure. You can either get an oral syringe at any drug store that has a 1-5ml gradated gauge on the side, or use measuring spoons. 1tsp=5ml of liquid. 1ml of the 'tincture' = 3 seeds. I've found that 3ml of the liquid works very well. Mix with water, or anything else.
This method works very well, is easy to dose, easy to prepare, and you should not experience any nausea. Also, because the LSA's are extracted they take way less longer to start working. Expect to feel the effects within an hour.
Keep your little bottle in the fridge. Heat is bad for all tryptamines.
Something to note: You can evaporate off the alcohol and you will be left with the alkaloids which you can put into gel caps etc. But, this is harder to dose, etc. I've found the alcohol method very easy and precise.