PDA

View Full Version : best way to scrape a tutor?

rich420
06-12-2009, 06:12 AM
To everyone that smokes their heroin, how do you scrape your tutors!? With oxy it's simple cause it's just powder that scrapes off easy, but with the H it's just really gooey and wet you know? Im just curious on a good method to remove the resin from inside a tutor to be used again.
stonerman420
06-12-2009, 07:45 AM
im sorry, i may sound dumb, or just plane unedjucated on the subject....but what exactly is a tutor?

i guess best i could assume is try using a razor blade to scrape it off.
197666Smoker
06-12-2009, 06:36 PM
my guess is the tutor is the straw he uses when chasing the dragon
Twizz
06-13-2009, 12:59 PM
Yeah if you're talking about the straw then maybe just try cleaning it with some 99% isopropanol from the local drugstore and then evaporate the alcohol on a plate til you're left with the goop, then scrape that up and do whatever with it.

never smoked my opiates, so I don't know if that will work but it works with my MJ pipes.
kiddydope-z
06-13-2009, 07:26 PM
if its plastic or metal, run a flame along the outside for a few seconds.. then use a long pin to scrape it out.. thats how i get my oc outta my tooter
rich420
06-17-2009, 06:26 AM
if its plastic or metal, run a flame along the outside for a few seconds.. then use a long pin to scrape it out.. thats how i get my oc outta my tooter

the plastic will melt.
ILL BILL NECRO
06-17-2009, 06:48 AM
use the alcohol method that would work for sure.
does2
06-17-2009, 07:01 AM
I bet they know the perfect method at opiophile.
kiddydope-z
06-17-2009, 11:54 AM
the plastic will melt.

yeah of course it will, which is why i said *run* it along the tooter

(dont burn your piece, im sure u know better than that ;))
mecca421
06-19-2009, 06:43 AM
take a pen apart so your left with the plastic tube with the ink and the ballpoint part, then light the end thats hollow for a second with a flame and press it down on a flat surface, it will make a nice plunger and should block the hole so nothing gets trapped inside the ink tube. ive scraped meth tooters like that, it should work with H
ILL BILL NECRO
06-19-2009, 08:15 AM
I bet they know the perfect method at opiophile.

lol....
1970somethin'
06-23-2009, 03:56 AM
take a pen apart so your left with the plastic tube with the ink and the ballpoint part, then light the end thats hollow for a second with a flame and press it down on a flat surface, it will make a nice plunger and should block the hole so nothing gets trapped inside the ink tube. ive scraped meth tooters like that, it should work with H

yup yup