a bedside table or is it :D

[temp303]

hello there every1 well as any1 who read my thread knows i wasnt alowed 2 grow in my house anymore so i had 2 go super stealth uder the radar so 2 speak n it became my bank holiday project n as i was building it i thought well y not make a thread showin jus how i do it then all u need 2 do is follow the instructions n b4 u kno it u 2 could be growing ur own loverly smoke! :)


wot u will need

1 cheep ass bedside table or other sutable chest of draws
1 envirolight
3 pc fans
2 dc adapters 12v
sum mylar
2. foot long pieces of chain(or sutable length 4 ur area)
1 box of small screws
1 packet of screw in hooks
1 pack of thumb tacks
a roll of duct tape
and a thermometer
i thinks thats about everything :)

[temp303]

ok well i took my bedside table removed all the drawers fliped it over n cut a piece of wood 2 perfectly sit in the bottom i

http://i159.photobucket.com/albums/t158/liquidloopz/DSC00349-1.jpg

i then duct taped the board in so wen i flipped it over n sealed it with mastic none would come through if there were any gaps i then drew circles in the top an bottom corner on opposite sides

http://i159.photobucket.com/albums/t158/liquidloopz/DSC00351-1.jpg

[temp303]

i then cut them badboys out with a chisel no less lol if u can get ur hands on a jigsaw it would make it easier i dont mind tho lil bit of work wont hurt

i then fitted the mylar in with thumbtacks i cut the mylar longer than i needed so wen i put the draws back on there will be no light leak

http://i159.photobucket.com/albums/t158/liquidloopz/DSC00358.jpg

so then its time 4 the drawer i gotta rip the draw apart n keep the front obviously :) i then cut another bit of m.d.f the width of my cab but longer than the bottom lip so it tucks in at the bottom i then flip the board over with the draw front underneath n screw that badboy nice n tight i also put gaffa tape down the sides of the m.d.f as 2 make it a little more air tight and snugg

1 draw
http://i159.photobucket.com/albums/t158/liquidloopz/DSC00365.jpg

2 draw
http://i159.photobucket.com/albums/t158/liquidloopz/DSC00368.jpg

[temp303]

3 draws becomes a door!

http://i159.photobucket.com/albums/t158/liquidloopz/DSC00369.jpg

heres a lil shot with the door off
http://i159.photobucket.com/albums/t158/liquidloopz/DSC00370.jpg

ok now u got the cab out the way its time 2 start on ur electrics cut the lil prong adapter off ur pc fans and off the 12v adapter right this is very important the red wire of the pc fan is connected 2 the black and white wire of the adapter ant the black wire of the pc fan is connected 2 the black wire of the adapter
http://i159.photobucket.com/albums/t158/liquidloopz/DSC00362.jpg

[temp303]

ok wen i bought my fans i bought 2 80x80 fans and a 90x90 the 2 80x80's i connected 2 the same adapter these are the air in and air out of my cab the 90x90 is to keep everything moveing in there n 2 strengthan the stem here is a pic of the back of my cab the air in n out
http://i159.photobucket.com/albums/t158/liquidloopz/DSC00374.jpg

then its time 2 hang ur light 2 screw in hook in the top of ur cab ur foot of chain on each 1 o used 2 bit of bare twin an earth 2 hold my light 2 the chain im not sure how safe it is but im test runnin the cab as we speak n all is well so far i think thats about it really if anybody want 2 kno anything else jus ask :)

http://i159.photobucket.com/albums/t158/liquidloopz/DSC00372.jpg

green thumbs every1

[M4N14C42O]

alright my man! That little beauty turned out well.......beautifully!! Now pop some beans and lets see this thing in action!! Haha jk......give er' a go whenever you feel you can start. You should definately start another journal or just continue in your old thread. Anywho had to stop in and give ya some props!! Good job bud!

- 42o -

[skullkidnate]

Great job! You may want to make a carbon scrubber attached to the outtake fan.

Keep in mind light will leak through the fans, so it may be odd for someone to see that against a wall with light coming out of it. Also light will get in when you want complete darkness, leading to your buds not developing.

[temp303]

hey there maniac thanks bud kind words always appreciated :) skullkidnate im not goin 2 hav a scrubber as i dont think the fan wold like it very much but insted im gonna hav a duct go straight from the fan 2 the window :) and mate wot u say is very true about the light leakage my lights go off wen i go 2 sleep so they dont keep me awake n come on about 5ish in the morning wen the timer kicks in 4 now it will be ok as im growing d ryder in there which need no 12/12 whoop but i recon i will sort it out put like a deflecter on there or summit so the air has 2 go round summit b4 goin into or from the cab that should sort the light leaks out i recon thanks 4 the input bud :)

[BudBill]

Sweeeeet!!! Now that is the deal.

It turned out real nice my man!

GT!
B

[temp303]

(blushes) lol y thanks man im pretty proud :)

[alti1175]

yes, very nice job! i almost built one of thoes in a slightly larger dresser but plans changed:) good luck!

[lune]

Clean cab!

[temp303]

thanks chaps :) ive got plans 4 a bigger 1 soon if all goes well :)its only drawback is the size :)

[Severely stoned]

that's a fucking badass setup, im very jelious i might think about making one for myself because my dad's gay and will flip shit if im growing in his house (mom wont though ^^).